tcp和http

_相关内容

CreateServerGroup

true(default)false true HealthCheckType string No The health check protocol.Valid values:TCP HTTP UDP TCP HealthCheckConnectPort integer No The port that is used for health checks on backend servers.Valid values:0 to 65535...

ModifyFirewallRule-修改实例防火墙规则

TCP+UDP:TCP UDP 协议。TCP Port string 是 端口范围。端口的取值范围为 1~65535。使用正斜线(/)隔开起始端口和终止端口,例如:1024/1055 表示端口范围为 1024~1055。3306 SourceCidrIp string 否 地址或地址段。10.147.33.*Remark ...

设置安全组规则

手动添加 配置安全组规则,各配置项说明如下:协议类型:支持TCP和UDP。更多详情,请参见 安全组规则。端口范围:匹配流量的目的端口,例如 22/22。更多信息,请参见 常用端口。授权对象:授权的源端IP,例如 192.XX.XX.100。描述:备注...

Configure an NLB instance using annotations

nginx namespace:default spec:externalTrafficPolicy:Local ports:name:tcp port:80 protocol:TCP targetPort:80-name:https port:443 protocol:TCP targetPort:443 selector:app:nginx loadBalancerClass:"alibabacloud....

DescribeFirewallTemplates-查询防火墙模板

TCP+UDP:TCP UDP 协议。ICMP:ICMP 协议。TCP Port string 端口范围。端口的取值范围为 1~65535。使用正斜线(/)隔开起始端口和终止端口,例如:1024/1055 表示端口范围为 1024~1055。说明 如果您设置的是 ICMP 协议,端口只能为-1/-1...

Use annotations to configure NLB instances

nginx namespace:default spec:externalTrafficPolicy:Local ports:name:tcp port:80 protocol:TCP targetPort:80-name:https port:443 protocol:TCP targetPort:443 selector:app:nginx loadBalancerClass:"alibabacloud....

添加服务Service

如 80|8080|TCP 80|8081|TCP,这两个端口映射无法保存,提示 端口映射存在重复项。结果验证 在当前应用中添加服务Service后,您可以登录K8s集群中的任一Pod,在Pod内根据Service固定IP地址访问应用。本示例验证的是访问Web服务,如果是...

DescribeFirewallTemplateRulesApplyResult-查询...

TCP+UDP:TCP UDP 协议。ICMP:ICMP 协议。TCP Port string 端口范围。端口的取值范围为 1~65535。使用正斜线(/)隔开起始端口和终止端口,例如:1024/1055 表示端口范围为 1024~1055。说明 如果您设置的是 ICMP 协议,端口只能为-1/-1...

DescribeInternetSlb-获取互联网SLB

枚举值:tcp:tcp udp:udp http:http https:https tcp Port string 否 端口。63389 CurrentPage string 否 当前查询页数。1 PageSize string 否 当前查询页码。10 返回参数 名称 类型 描述 示例值 object RequestId string 返回结果的请求 ...

UpdateK8sService-更新K8s服务

ClusterIP ServicePorts string 是 K8s Service 端口映射表,需要符合 JsonArray 格式,支持的参数如下:protocol:必填,服务协议,支持 TCP UDP。port:必填,前端服务端口,取值范围 1~65535。targetPort:必填,后端容器端口,取值...

CreateK8sService-创建K8s服务

ClusterIP ServicePorts string 是 K8s Service 端口映射表,需要符合 JsonArray 格式,支持的参数如下:protocol:必填,服务协议,支持 TCP UDP。port:必填,前端服务端口,取值范围 1~65535。targetPort:必填,后端容器端口,取值...

NVR注册、国标级联接入流程

阿里云视图计算接入网关支持UDP和TCP双协议多端口注册,UDP协议支持端口号5060、5160,TCP协议支持端口号6060、6160。在视图计算控制台添加NVR设备,填写国标ID,用户名和密码。说明 左侧为阿里云监控控制台,右面为NVR设备管理页面示意图...

什么是chargen服务放大DDoS攻击

它的默认端口为19,分为基于TCP和UDP两种方式。TCP方式下建立连接后,服务器会不断传送任意字符到客户端,直到客户端关闭连接。UDP方式下每当服务器收到客户端的一个UDP数据包后,向客户端返回一个数据包,长度为0~512字节之间随机值,数据...

ListFirewallRules-获取实例的防火墙规则

TCP+UDP:TCP UDP 协议。TCP Policy string 防火墙策略。accept:允许。drop:拒绝。accept Tags array object 防火墙规则的标签列表。tag object 标签。Key string 防火墙规则的标签键。TestKey Value string 防火墙规则的标签值。...

配置安全组实现NLB基于监听/端口粒度的访问控制

本文从以下三种操作来说明 NLB 实例加入安全组后对协议/端口的访问控制,且以NLB实例配置TCP 80监听和TCP 81监听为例说明。编号 安全组规则 预期结果 相关操作链接 操作一:NLB实例未加入安全组 NLB 监听端口默认对所有请求放行。此处仅以 ...

Common ports

1/-1 CIDR block access or security group access Varies based on the authorization type 1 Classic network Internet inbound Use an ECS instance as a web server Virtual Private Cloud(VPC)Inbound Allow Custom TCP HTTP(80)CIDR ...

GetTransportLayerApplication-查询四层加速应用

PPv2:PROXY Protocol v2 协议,支持 TCP UDP 协议的客户端 IP 传递。SPP:Simple Proxy Protocol 协议,支持 UDP 协议的客户端 IP 传递。off Comment string 规则的备注信息。测试 RuleId long 规则 ID。1234323*Cname string 四层加速...

ListProbeTask

TaskName string Yes The name of the probe task.test-ping Protocol string Yes The protocol of the probe task.Valid values:ICMP TCP HTTP Note Tasks that probe private networks support only ICMP and TCP.ICMP SagName string ...

在Alibaba Cloud Linux 2实例中使用NAT存在TCP连接...

当TCP连接超时后,且运行 conntrack-S 命令后,insert_failed数值和TCP连接超时次数呈正相关关系,出现如下调用栈信息。cpu=0 found=291259242 invalid=3597 ignore=10555395 insert=0 insert_failed=4899 drop=4899 early_drop=0 error=0 ...

UpdateProbeTask

ICMP TCP HTTP Note Tasks that probe private networks support only ICMP and TCP.ICMP Domain string No The domain name that is probed by the task.If the protocol of the probe task is ICMP or TCP,set the value to the IP ...

Manage the firewall of a simple application server

see Common ports.Application type Protocol Port range Source IP address Description HTTP TCP 80 0.0.0.0/0 Important The source IP addresses.The default value is 0.0.0.0/0,which specifies all IPv4 addresses.Configure IP ...

路径MTU发现机制(PMTUD)

在SYN报文中,发送端会包含一个MSS选项,这个值通常是基于该端点的MTU减去IP和TCP首部的固定开销得出的。接收端收到SYN报文后,会根据自己的MTU来确认一个合适的MSS值,并在SYN+ACK报文中返回给发送端。这样,双方就确定了通信时使用的最大...

ListEndpointGroups

this parameter specifies the ratio of traffic that is distributed to the endpoint group.100 HealthCheckProtocol string The protocol that is used for health checks.tcp or TCP:TCP http or HTTP:HTTP https or HTTPS:HTTPS tcp ...

国标协议接入流程

您可以通过本文了解国标协议接入流程。国标注册流程说明 国标设备(这里以摄像头为例)通过国标GB/T28181接入...说明 在视图计算控制台预览,需要满足以下条件:视频H.264编码音频AAC编码 播流域名配置了跨域访问 播流域名配置了HTTPS证书

UpdateEndpointGroups

1 to 65535.20 HealthCheckProtocol string No The protocol that is used for health checks.tcp or TCP:TCP http or HTTP:HTTP https or HTTPS:HTTPS tcp ThresholdCount integer No The number of consecutive health checks that an ...

ListServerGroups

true false false HealthCheckType string The protocol that is used for health checks.Valid values:TCP HTTP UDP TCP HealthCheckConnectPort integer The backend port that is used for health checks.Valid values:0 to 65535.A ...

为什么监控查询流量、用量查询流量与日志统计流量有...

监控查询流量、用量查询流量统计的是实际产生的网络流量,而日志统计流量统计的是应用层产生的流量,由于TCP/IP包头和TCP重传等原因,实际的计费流量(也包括监控查询流量)是通过日志统计流量的1.1倍。问题现象 为什么通过 CDN 控制台...

Use annotations to configure CLB instances

based CLB instance Enable session persistence for an HTTP or HTTPS listener ...HTTPS listener Create a listener that enables health checks Configure connection draining for a listener Configure additional request headers for ...

为什么监控查询流量、用量查询流量与日志统计流量有...

监控查询流量、用量查询流量统计的是实际产生的网络流量,而日志统计流量统计的是应用层产生的流量,由于TCP/IP包头和TCP重传等原因,实际的计费流量(也包括监控查询流量)是通过日志统计流量的1.1倍。问题现象 为什么通过 DCDN 控制台...

CreateProbeTask

ping Type string Yes The type of the probe task.Valid values:Internet:probes a public network.Intranet:probes a private network.Internet Protocol string Yes The protocol of the probe task.Valid values:ICMP TCP HTTP Note ...

共享内存通信(SMC)适用性说明

传统虚拟网卡和TCP协议栈逐渐无法满足数据中心对网络高吞吐、低时延的诉求。同时,随着云计算场景DPU能力的进一步增强,云上开始提供RDMA网络,以充分利用硬件能力提升网络性能。在这样的趋势下,一种能充分发挥下层DPU硬件性能,同时支撑...

ListTransportLayerApplications-查询站点的四层加速...

PPv2:PROXY Protocol v2 协议,支持 TCP UDP 协议的客户端 IP 传递。SPP:Simple Proxy Protocol 协议,支持 UDP 协议的客户端 IP 传递。off SourceType string 源站类型,支持:ip:IP。domain:域名。OP:源地址池。LB:负载均衡器。ip ...

UpdateEndpointGroup

tcp or TCP:TCP http or HTTP:HTTP https or HTTPS:HTTPS HTTPS ThresholdCount integer No The number of consecutive health checks that must succeed or fail before the health check status of the endpoint changes from healthy to...

Configure a Classic Load Balancer using ...

created SLB instance when the Service is deleted Typical listener operations...HTTP listener Create an HTTPS listener Configure TCP and UDP protocols for the listener at the same time Configure the Proxy Protocol for TCP and ...

Configure service health checks

turn on the Active Health Check switch,configure the parameters,and click OK.The following table describes the parameters.Configuration item Example value Description Health Check Protocol HTTP TCP:A TCP health check sends...

Use annotations to configure CLB instances

based CLB instance Enable session persistence for an HTTP or HTTPS listener ...HTTPS listener Create a listener that enables health checks Configure connection draining for a listener Configure additional request headers for ...

使用插件部署混合云集群

lim 7869 TCP sbatchd 6882 TCP res 42151 TCP 域控(以Windows AD+Linux SSSD为例)服务 端口 协议 备注 DNS 53 UDP和TCP DNS域名解析。LDAP 389 UDP和TCP LDAP目录访问。Samba 445 UDP和TCP SMB服务通信。用于AD组策略对象(GPO)。...

自定义MQTT Topic通信

用于MQTT功能,加密连接的情况 HAL_SSL_Write 向一个TLS连接中写数据,用于MQTT功能,加密连接的情况 HAL_TCP_Destroy 销毁一个TLS连接,用于MQTT功能 HAL_TCP_Establish 建立一个TCP连接,包含了域名解析的动作和TCP连接的建立 ...

如何抓取网络包

比较常见的网络层问题包括 SSL 握手失败 TCP 链接中断、重发等。使用常见抓包工具 本节介绍 Wireshark 和 TCPDUMP 的基本使用方法。Wireshark 下载和安装 在 Wireshark 官网 下载安装包,安装并启动后,主界面如下(Mac 和 Windows 版本...
< 1 2 3 4 ... 200 >
共有200页 跳转至: GO
新人特惠 爆款特惠 最新活动 免费试用