nagios 监控 cisco 交换机
一、环境：
1.已搭建好nagios4.0.8
2.Centos6.5 x86_64
二、需要有4个监控cisco的脚本
check_snmp_cisco_ifstatus
check_snmp_cisco_loadavg
check_snmp_cisco_memutil
check_snmp_env
下载链接：http://down.51cto.com/data/2118262
三、配置
vim /usr/local/nagios/etc/objects/templates.cfg
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
define host{
name etnet-switch
use generic-host
check_period 24x7
check_interval 1
retry_interval 1
/2
max_check_attempts 2
check_command check-host-alive
notification_period 24x7
notification_interval 30
notification_options d,r
contact_groups admins
register 0
}
|
vim /usr/local/nagios/etc/objects/commands.cfg
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
|
##check cisco
#define check_snmp_env
define
command
{
command_name check_snmp_env
command_line $USER1$
/check_snmp_env
-H $HOSTADDRESS$ -C $ARG1$ $ARG2$
}
#define check_snmp cisco mem
define
command
{
command_name check_snmp_cisco_mem
command_line $USER1$
/check_snmp_cisco_memutil
-H $HOSTADDRESS$ -C $ARG1$ -w $ARG2$ -c $ARG3$
}
#define check_snmp cisco cpu
define
command
{
command_name check_snmp_cisco_cpu
command_line $USER1$
/check_snmp_cisco_loadavg
-H $HOSTADDRESS$ -C $ARG1$ -w $ARG2$ -c $ARG3$
}
#define check_snmp cisco if
define
command
{
command_name check_snmp_cisco_if
command_line $USER1$
/check_snmp_cisco_ifstatus
-H $HOSTADDRESS$ -C $ARG1$ -i $ARG2$ -w $ARG3$ -c $ARG4$
}
|
vim /usr/local/nagios/etc/objects/151.3.cfg
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
define host{
use etnet-switch
host_name Office-192.168.151.3
alias
Switch 151.3
address 192.168.151.3
}
define service{
use generic-service
host_name Office-192.168.151.3
service_description PING
check_command check_ping!200.0,20%!600.0,60%
normal_check_interval 5
retry_check_interval 1
}
define service{
use generic-service
host_name Office-192.168.151.3
service_description Uptime
check_command check_snmp!-C public -o sysUpTime.0
}
define service{
use generic-service
host_name Office-192.168.151.3
service_description Port 1 Link Status
check_command check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
}
define service {
use generic-service
host_name Office-192.168.151.3
service_description Memutil
check_command check_snmp_cisco_mem!public!90!95
}
define service {
use generic-service
host_name Office-192.168.151.3
service_description LoadAVG
check_command check_snmp_cisco_cpu!public!90!95
}
define service {
use generic-service
host_name Office-192.168.151.3
service_description Environment
check_command check_snmp_env!public
}
|
添加监控交换机
vim /usr/local/nagios/etc/nagios.cfg
|
1
|
cfg_file=
/usr/local/nagios/etc/objects/151
.3.cfg
|
重启nagios
/etc/init.d/nagios restart
四、可能会报错
|
1
2
3
|
No output on stdout) stderr: Can't
locate
Net
/SNMP
.pm
in
@INC (@INC contains:
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.) at
/usr/local/nagios/libexec/check_snmp_env
line 21.
|
问题1：
perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .).
解决：
|
1
|
yum
install
-y perl-CPAN*
|
问题2：
No output on stdout) stderr: Can't locate Net/SNMP.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at
/usr/local/nagios/libexec/check_snmp_env line 21.
解决：
|
1
2
3
|
perl -MCPAN -e shell
cpan[1]>
install
Net::SNMP
cpan[2]> quit
|
网上的解决方案
How do I install Net::SNMP perl module ? There are 2 ways of doing this
1) By CPAN (best)
on command line, as root :
[your_host]# perl -MCPAN -e shell
cpan shell -- CPAN exploration and modules installation (v1.76)
ReadLine support enabled
cpan> install Net::SNMP
If it's the first time you run CPAN, it will probably ask you some (simple) questions.
CPAN will also ask you to satisfy some dependencies (Crypt::DES, Digest::MD5, etc..).
2) "By hand"
Get the folowings modules (tar.gz format) on www.cpan.org
- Crypt::DES
- Digest::MD5
- Digest::SHA1
- Digest::HMAC
- Net::SNMP
for each one (you must install Net::SNMP at the end) :
tar zxf <module>.tar.gz
cd <module>
perl Makefile.pl
make test
make install
本文转自独弹古调 51CTO博客，原文链接：http://blog.51cto.com/hunkz/1712572，如需转载请自行联系原作者
