Linux errno

简介: Linux/include/uapi/asm-generic/errno-base.h #ifndef _ASM_GENERIC_ERRNO_BASE_H #define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* ...

Linux/include/uapi/asm-generic/errno-base.h
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H

#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */

#endif

Linux/include/uapi/asm-generic/errno.h
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H

#include <asm-generic/errno-base.h>

#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */

/*
* This error code is special: arch syscall entry code will return
* -ENOSYS if users try to call a syscall that doesn't exist. To keep
* failures of syscalls that really do exist distinguishable from
* failures due to attempts to use a nonexistent syscall, syscall
* implementations should refrain from returning -ENOSYS.
*/
#define ENOSYS 38 /* Invalid system call number */

#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */

#define EDEADLOCK EDEADLK

#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */

#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */

#define ERFKILL 132 /* Operation not possible due to RF-kill */

#define EHWPOISON 133 /* Memory page has hardware error */

#endif

 

Linux/include/linux/errno.h
#ifndef _LINUX_ERRNO_H
#define _LINUX_ERRNO_H

#include <uapi/linux/errno.h>


/*
* These should never be seen by user programs. To return one of ERESTART*
* codes, signal_pending() MUST be set. Note that ptrace can observe these
* at syscall exit tracing, but they will never be left for the debugged user
* process to see.
*/
#define ERESTARTSYS 512
#define ERESTARTNOINTR 513
#define ERESTARTNOHAND 514 /* restart if no handler.. */
#define ENOIOCTLCMD 515 /* No ioctl command */
#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
#define EPROBE_DEFER 517 /* Driver requests probe retry */
#define EOPENSTALE 518 /* open found a stale dentry */

/* Defined for the NFSv3 protocol */
#define EBADHANDLE 521 /* Illegal NFS file handle */
#define ENOTSYNC 522 /* Update synchronization mismatch */
#define EBADCOOKIE 523 /* Cookie is stale */
#define ENOTSUPP 524 /* Operation is not supported */
#define ETOOSMALL 525 /* Buffer or request is too small */
#define ESERVERFAULT 526 /* An untranslatable error occurred */
#define EBADTYPE 527 /* Type not supported by server */
#define EJUKEBOX 528 /* Request initiated, but will not complete before timeout */
#define EIOCBQUEUED 529 /* iocb queued, will get completion event */
#define ERECALLCONFLICT 530 /* conflict with recalled state */

#endif

目录
相关文章
|
存储 Linux Shell
Linux系统调用十、进程地址空间、文件描述符、errno错误码、dup()重定向
Linux系统调用十、进程地址空间、文件描述符、errno错误码、dup()重定向
215 0
Linux系统调用十、进程地址空间、文件描述符、errno错误码、dup()重定向
|
Linux API
LINUX errno大全
查看错误代码errno是调试程序的一个重要方法。当linuc C api函数发生异常时,一般会将errno变量(需include errno.h)赋一个整数值,不同的值表示不同的含义,可以通过查看该值推测出错的原因。
1161 0
|
安全 Linux C语言
|
4天前
|
机器学习/深度学习 缓存 监控
linux查看CPU、内存、网络、磁盘IO命令
`Linux`系统中,使用`top`命令查看CPU状态,要查看CPU详细信息,可利用`cat /proc/cpuinfo`相关命令。`free`命令用于查看内存使用情况。网络相关命令包括`ifconfig`(查看网卡状态)、`ifdown/ifup`(禁用/启用网卡)、`netstat`(列出网络连接,如`-tuln`组合)以及`nslookup`、`ping`、`telnet`、`traceroute`等。磁盘IO方面,`iostat`(如`-k -p ALL`)显示磁盘IO统计,`iotop`(如`-o -d 1`)则用于查看磁盘IO瓶颈。
|
22小时前
|
监控 Linux Windows
50个必知的Linux命令技巧,你都掌握了吗?(下)
50个必知的Linux命令技巧,你都掌握了吗?(下)
|
1天前
|
Linux Shell Windows
Linux 常用基本命令
Linux 常用基本命令
|
1天前
|
Ubuntu Linux Shell
linux免交互登陆远程主机并执行命令(密钥对和Expect)
linux免交互登陆远程主机并执行命令(密钥对和Expect)
|
1天前
|
Linux
【Linux】常用命令
【Linux】常用命令
21 0