备案控制台
探索云世界
开发者社区 开发与运维 文章 正文

Linux Mint 18.2 安装与调整

2017-07-18 3111
版权
版权声明：
本文内容由阿里云实名注册用户自发贡献，版权归原作者所有，阿里云开发者社区不拥有其著作权，亦不承担相应法律责任。具体规则请查看《 阿里云开发者社区用户服务协议》和 《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容，填写 侵权投诉表单进行举报，一经查实，本社区将立刻删除涉嫌侵权内容。
简介： 安装系统连接到wifi网络下再从U盘安装.会自动安装中文语言包磁盘划分的时候开启 LVM 便于后期调整U盘安装完以后重启系统重启后关闭蓝牙接收以及任务栏图标[开始菜单] - [系统管理] - [软件源] 调整镜像源(可以考虑使用阿里源.

安装系统

  • 连接到wifi网络下再从U盘安装.会自动安装中文语言包
  • 磁盘划分的时候开启 LVM 便于后期调整
  • U盘安装完以后重启系统
  • 重启后关闭蓝牙接收以及任务栏图标
  • [开始菜单] - [系统管理] - [软件源] 调整镜像源(可以考虑使用阿里源.根据自己的测试结果综合选择,如果速度不慢的话 最好使用官方源)
  • sudo apt update
  • sudo apt install gedit unzip zip rar unrar axel git tlp
  • 再使用[更新管理器] 安装更新补丁,更新完后重启电脑
  • linux内核只安装放行版本推荐的.无需自行安装最新的.稳定才是第一生产力

安装输入法

  • 无需参考网上使用apt方式安装
  • 直接使用[开始菜单] - [首选项] -[输入法],选择 [语言] 中的 [语言支持] 点击[中文语言] 安装
  • 使用[开始菜单] - [首选项] -[输入法],选择 [语言支持] [简体中文] 安装.如果这一步出错.请将前面一步的源设置成 美国mint官方源.然后执行 sudo apt update之后.再操作,安装完以后将同面板下的[输入法]下拉框选择成 Fcitx
  • 打开浏览器到搜狗拼音输入法官网下载最新的linux deb安装包进行安装,安装完后自行添加搜狗的词库.这样打字很顺手的.
  • 安装完成后修改 sudo gedit /etc/X11/xinit/xinitrc [对比一下应该可以直接复制]
#!/bin/sh  

# /etc/X11/xinit/xinitrc  
#  
# global xinitrc file, used by all X sessions started by xinit (startx)  

# invoke global X session script  
export GTK_IM_MODULE=fcitx  
export QT_IM_MODULE=fcitx  
export XMODIFIERS="@im=fcitx"  
exec /etc/X11/Xsession

优化/etc/sysctl.conf 中网络参数

如果发行版本linux内核没有上4.9就无需考虑bbr,直接使用以下参数即可


    net.ipv4.tcp_tw_reuse = 1
    net.ipv4.tcp_tw_recycle = 1
    net.ipv4.tcp_syn_retries = 1
    net.ipv4.tcp_synack_retries = 1


#尽量使用内存而不使用swap分区
vm.swappiness = 1

#阻止别人ping通自己
net.ipv4.icmp_echo_ignore_all = 1


#跟换了4.10以上内核的可以开启bbr
net.core.default_qdisc=fq
net.ipv4.tcp_congestion_control=bbr

#disable ipv6 
net.ipv6.conf.all.disable_ipv6 = 1 
net.ipv6.conf.default.disable_ipv6 = 1 
net.ipv6.conf.lo.disable_ipv6 = 1

优化磁盘参数

sudo gedit /etc/fstab

/dev/sda1 / ext4 discard,noatime,nodiratime,commit=600,errors=remount-ro 0 1

主要是加上 discard,noatime,nodiratime,commit=600

sudo gedit /etc/rc.local

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

#加大预读取大小 需要根据自己的磁盘数来调节
/sbin/blockdev --setra 128 /dev/sda
/sbin/blockdev --setra 128 /dev/sdb

#提高调度器请求队列的
echo 4096 > /sys/block/sdb/queue/nr_requests

# 设置磁盘调度模式
# deadline > /sys/block/sda/queue/scheduler
#echo deadline > /sys/block/sdb/queue/scheduler

#modprobe acpi_call
#/usr/sbin/tlp start
exit 0

sudo gedit /etc/default/grub
修改 GRUB_CMDLINE_LINUX_DEFAULT .在原来的基础上增加
intel_pstate=enable rootflags=data=writeback

如:

GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=enable quiet splash irqpoll rootflags=data=writeback"

可以缩短引导时间
GRUB_TIMEOUT=6
编辑完后保存,运行
sudo grub-mkconfig -o /boot/grub/grub.cfg

TLP配置文件

如果安装了TLP
可以参考设置

# ------------------------------------------------------------------------------
# tlp - Parameters for power save
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html

# Hint: some features are disabled by default, remove the leading # to enable
# them.

# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1

# Operation mode when no power supply can be detected: AC, BAT
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC

# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2

# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60

# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.

# Select a CPU frequency scaling governor:
#   ondemand, powersave, performance, conservative
# Intel Core i processor with intel_pstate driver:
#   powersave, performance
# Important:
#   You *must* disable your distribution's governor settings or conflicts will
#   occur. ondemand is sufficient for *almost all* workloads, you should know
#   what you're doing!
CPU_SCALING_GOVERNOR_ON_AC=performance
CPU_SCALING_GOVERNOR_ON_BAT=powersave

# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# tlp-stat output, Section "+++ Processor".
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0

# Set Intel P-state performance: 0..100 (%)
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
CPU_MIN_PERF_ON_AC=0
CPU_MAX_PERF_ON_AC=100
CPU_MIN_PERF_ON_BAT=1
CPU_MAX_PERF_ON_BAT=30

# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
CPU_BOOST_ON_AC=1
CPU_BOOST_ON_BAT=0

# Minimize number of used CPU cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1

# Kernel NMI Watchdog:
#   0=disable (default, saves power), 1=enable (for kernel debugging only)
NMI_WATCHDOG=0

# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Frequency voltage pairs are written to:
#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"

# Set CPU performance versus energy savings policy:
#   performance, normal, powersave
# Requires kernel module msr and x86_energy_perf_policy from linux-tools
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave

# Hard disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"

# Hard disk advanced power management level: 1..254, 255 (max saving, min, off)
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"

# Hard disk spin down timeout:
#   0:        spin down disabled
#   1..240:   timeouts from 5s to 20min (in units of 5s)
#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"

# Select IO scheduler for the disk devices: noop, deadline, cfq (Default: cfq);
# Separate values for multiple devices with spaces.
DISK_IOSCHED="noop cfq"

# SATA aggressive link power management (ALPM):
#   min_power, medium_power, max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power

# PCI Express Active State Power Management (PCIe ASPM):
#   default, performance, powersave
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave

# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
# (Kernel >= 2.6.35 only, open-source radeon driver explicitly)
RADEON_POWER_PROFILE_ON_AC=default
RADEON_POWER_PROFILE_ON_BAT=low

# Radeon dynamic power management method (DPM): battery, performance
# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery

# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto

# WiFi power saving mode: 1=disable, 5=enable; not supported by all adapters.
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5

# Disable wake on LAN: Y/N
WOL_DISABLE=Y

# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power save.
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1

# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y

# Set to 1 to power off optical drive in UltraBay/MediaBay when running on
# battery. A value of 0 disables this feature (Default).
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"

# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto

# Runtime PM for *all* PCI(e) bus devices, except blacklisted ones:
#   0=disable, 1=enable
RUNTIME_PM_ALL=1

# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"

# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM
# (should prevent accidential power on of hybrid graphics' discrete part).
# Default is "radeon nouveau"; use "" to disable the feature completely.
# Separate multiple drivers with spaces.
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"

# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1

# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically (see below)
USB_BLACKLIST="1c4f:0065"

# WWAN devices are excluded from USB autosuspend:
# 0=do not exclude / 1=exclude
USB_BLACKLIST_WWAN=1

# Include listed devices into USB autosuspend even if already excluded
# by the driver or WWAN blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"

# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1

# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
#   are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0

# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"

# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"

# Radio devices to disable on shutdown: bluetooth, wifi, wwan
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"

# Radio devices to enable on shutdown: bluetooth, wifi, wwan
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"

# Radio devices to enable on AC: bluetooth, wifi, wwan
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"

# Radio devices to disable on battery: bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"

# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"

# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_TRESH value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main / Internal battery (values in %)
START_CHARGE_THRESH_BAT0=70
STOP_CHARGE_THRESH_BAT0=99
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=70
#STOP_CHARGE_THRESH_BAT1=99

# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan

# Hints:
# - Parameters are disabled by default, remove the leading # to enable them.
# - Separate multiple radio devices with spaces.

# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"

# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""

# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""

# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""

安装软件

  • 使用[开始菜单] -[系统管理] -[新立得软件包管理器] 安装 vlc 播放器
  • 安装wps .不要从国内官方网址下载. 要打开 http://wps-community.org,先下载字体deb包与wps安装包,先安装wps再安装字体包, 如果是64位的机器就下载 名字中有 amd64.deb的文件,下载的时候可以使用多线程下载
    比如:
axel -an 5 http://kdl1.cache.wps.com/ksodl/download/linux/a21//wps-office_10.1.0.5707~a21_amd64.deb
  • 安装字体(比如Yahei 这里不做过多介绍)
  • 远程桌面以及SSH工具 sudo apt install Remmina
  • google-chrome浏览器 到 https://pkgs.org/download/google-chrome-stable 下载deb 安装
  • 截图工具安装深度截图2.0 deb .自行网上下载.然后到 [键盘] 中设置快捷键 即可达到类似qq截图的效果
  • 到[驱动管理器]中安装显卡驱动 以及 CPU微码驱动,安装完后需重新启动计算机
  • 安装sublime Text 后,注册码自行百度.再安装中文输入补丁才能打字.补丁位置:https://github.com/lyfeyaj/sublime-text-imfix
  • 远程链接管理管局; window 远程桌面 rdesktop , sudo apt install rdesktop
rdesktop -f -a 16 -n  fuwuqi   -r disk:myDisk=/dev/shm  -u Administrator -p passwd  -0 192.168.1.10

桌面字体优化

sudo gedit /usr/share/themes/Linux Mint/cinnamon/cinnamon.css
前提是安装了yahei字体

stage {
    font-family: Microsoft YaHei,Noto Sans, sans-serif;
}

添加分辨率

有些分辨率默认不会增加到[显示]中
以1920x1080分辨率为例，以下是第二种方法的操作步骤：

1、在终端输入：$ cvt 1920 1080
得到以下信息

1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline “1920x1080_60.00” 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync

终端输入:sudo gedit /etc/X11/xorg.conf

Section "Monitor"
    Identifier "Configured Monitor"
    Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync //来自步骤1
    Option "PreferredMode" "1920x1080_60.00" //来自步骤1
EndSection

Section "Screen"
    Identifier "Default Screen"
    Monitor "Configured Monitor"
    Device "Configured Video Device"
EndSection

Section "Device"
    Identifier "Configured Video Device"
EndSection

保存，重启，查看效果

解决Eclipse svn冲突

1 . 安装JavaHL sudo apt-get install libsvn-java
2. 使用 dpkg -L libsvn-java 查看安装位置

XXXX@M4600 /usr/lib $ dpkg -L libsvn-java
/.
/usr
/usr/lib
/usr/lib/x86_64-linux-gnu
/usr/lib/x86_64-linux-gnu/jni
/usr/lib/x86_64-linux-gnu/jni/libsvnjavahl-1.so.0.0.0
/usr/share
/usr/share/java
/usr/share/java/svn-javahl.jar
/usr/share/doc
/usr/lib/x86_64-linux-gnu/jni/libsvnjavahl-1.so
/usr/lib/x86_64-linux-gnu/jni/libsvnjavahl-1.so.0
/usr/share/doc/libsvn-java
  1. 修改eclipse.ini 在最后增加 
-vm
/home/XXXX/devloperTool/jdk1.8.0_131/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.201.v20161025-1711.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.401.v20161122-1740
-product
org.eclipse.epp.package.jee.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vmargs
-Dosgi.requiredJavaVersion=1.8
-XX:+UseG1GC
-XX:+UseStringDeduplication
-Xms1024m
-Xmx1024m
-Xverify:none
-Djava.library.path=/usr/lib/x86_64-linux-gnu/jni
文章标签：
Linux
Java
编解码
关键词：
Linux安装
Linux Mint
Linux mint安装
宝珠
目录
相关文章
jianz123
|
10天前
|
缓存 Linux 测试技术
安装【银河麒麟V10】linux系统--并挂载镜像
安装【银河麒麟V10】linux系统--并挂载镜像
jianz123
61 0
jianz123
|
10天前
|
Linux C语言
linux yum安装ffmpeg 图文详解
linux yum安装ffmpeg 图文详解
jianz123
28 0
jianz123
|
10天前
|
NoSQL Linux Redis
linux 下和win下安装redis 并添加开机自启 图文详解
linux 下和win下安装redis 并添加开机自启 图文详解
jianz123
15 0
jianz123
|
10天前
|
Linux
linux yum 安装rar和unrar
linux yum 安装rar和unrar
jianz123
35 0
风水道人
|
22天前
|
Java Linux Maven
Linux中安装MAVEN环境配置
Linux中安装MAVEN环境配置
风水道人
47 3
风水道人
|
23天前
|
存储 负载均衡 索引
linux7安装elasticsearch-7.4.0集群配置
linux7安装elasticsearch-7.4.0集群配置
风水道人
109 0
周周的奇妙编程
|
27天前
|
Linux 数据安全/隐私保护 虚拟化
Linux技术基础（1）——操作系统的安装
本文是龙蜥操作系统(Anolis OS) 8.4 的安装指南，用户可以从[龙蜥社区下载页面](https://openanolis.cn/download)获取ISO镜像。安装方法包括物理机的光驱和USB闪存方式，以及虚拟机中的VMware Workstation Pro设置。安装过程涉及选择语言、配置安装目标、选择软件集合和内核，设置Root密码及创建新用户。安装完成后，可通过文本模式或图形化界面验证系统版本，如Anolis OS 8.4，标志着安装成功。
周周的奇妙编程
74 3
Sunny_yiyi
|
22天前
|
消息中间件 Java Linux
Linux下RabbitMQ安装与使用
Linux下RabbitMQ安装与使用
Sunny_yiyi
32 1
Hacoj
|
3天前
|
关系型数据库 MySQL Linux
Linux联网安装MySQL Server
Linux联网安装MySQL Server
Hacoj
13 0
jianz123
|
10天前
|
Java Linux 开发工具
linux jdk的安装
linux jdk的安装
jianz123
16 0

热门文章

最新文章

  • 1
    Linux基础与服务器架构综合小实践
  • 2
    网络名称空间在Linux虚拟化技术中的位置
  • 3
    【Linux系统编程】深入解析Linux中read函数的错误场景
  • 4
    【Shell 命令集合 网络通讯 】Linux 管理Apache HTTP服务器 apachectl命令 使用教程
  • 5
    【Shell 命令集合 文件管理】Linux 更新locate命令所使用的数据库 updatedb命令解析
  • 6
    Linux如何检查文件夹的大小？
  • 7
    Linux 命令大全 & CentOS常用运维命令
  • 8
    linux7安装elasticsearch-7.4.0集群配置
  • 9
    深入解析Linux C/C++ 编程中的内存泄漏问题
  • 10
    探秘Linux特殊设备文件：（/dev/null,/dev/zero,/dev/random,/dev/urandom等）
  • 1
    linux实验参考1
    12
  • 2
    Linux中认识路径的概念
    9
  • 3
    Linux创建空白文件
    6
  • 4
    通过Linux挂载Windows端NFS服务实现板端Linux传输文件到PC
    21
  • 5
    Linux实现socket网络通信
    13
  • 6
    Linux 常用命令汇总（五）：网络操作命令
    25
  • 7
    Linux安装HBase的详细教程及常用方法
    75
  • 8
    Linux系统之rename命令的基本使用
    141
  • 9
    Linux系统之file命令的基本使用
    45
  • 10
    Linux 常用命令汇总（四）：信息显示 & 用户管理
    23

    • 相关课程

    更多
  • Linux高级网络应用 - 网络管理与配置实战
  • Linux服务器运维基本操作
  • Linux基本命令
  • Linux企业运维实战 - 入门及常用命令
  • Linux Shell 编程入门与实战
  • Linux网络进阶 - TCP/IP协议及OSI七层模型

    • 相关电子书

    更多
  • Alibaba Cloud Linux 3 发布
  • ECS系统指南之Linux系统诊断
  • ECS运维指南 之 Linux系统诊断

    • 相关实验场景

    更多
  • Alibaba Cloud Linux操作系统的安装及使用
  • Alibaba Cloud Linux操作系统Shell程序

    • 推荐镜像

    更多
  • mxlinux-iso
  • archlinuxarm
  • archlinuxcn
    • 下一篇
    阿里云oss简介和使用流程