RedHat 5.8 安装Oracle 11gR2_Grid集群
1、 通过rpm安装相应软件包：
rpm -ivh binutils-2*.i386.rpm
rpm -ivh binutils-2*.x86_64.rpm
rpm -ivh compat-libstdc++-33-*i*
rpm -ivh compat-libstdc++-33-x*
rpm -ivh elfutils-libelf-0*.i386.rpm
rpm -ivh elfutils-libelf-0*.x*
rpm -ivh elfutils-libelf-devel-0*.i386.rpm
rpm -ivh elfutils-libelf-devel-0.137-3.el5.x*
rpm -ivh compat-libstdc++-2*.i*.rpm
rpm -ivh compat-libstdc++-3*.i*.rpm
rpm -ivh compat-libstdc++-3*.x*.rpm
rpm -ivh gcc-4*.i*
rpm -ivh gcc-4*.x*
rpm -ivh gcc-4.1.2-52.el5.i386.rpm
rpm -ivh gcc-c++-*.x*.rpm
rpm -ivh gcc-c++-*.i*.rpm
rpm -ivh glibc-2.5-81.i*.rpm
rpm -ivh glibc-2.5-81.x*.rpm
rpm -ivh glibc-common-*.i*.rpm
rpm -ivh glibc-common-*.x*.rpm
rpm -ivh glibc-devel*.i*.rpm
rpm -ivh glibc-devel*.x*.rpm
rpm -ivh glibc-headers*.i*.rpm
rpm -ivh glibc-headers*.x*.rpm
rpm -ivh ksh-*.x*.rpm
rpm -ivh ksh-*.i*.rpm
rpm -ivh pdksh-*.i*.rpm
rpm -ivh pdksh-*.x*.rpm
rpm -ivh libaio-0*.i*.rpm
rpm -ivh libaio-0*.x*.rpm
rpm -ivh libaio-devel*.i*.rpm
rpm -ivh libaio-devel*.x*.rpm
rpm -ivh libgcc-4*.i*.rpm
rpm -ivh libgcc-4*.x*.rpm
rpm -ivh libstdc++-4*.i*.rpm
rpm -ivh libstdc++-4*.x*.rpm
rpm -ivh libstdc++-devel*.i*.rpm
rpm -ivh libstdc++-devel*.x*.rpm
rpm -ivh make-3*.i*.rpm
rpm -ivh make-3*.x*.rpm
rpm -ivh sysstat-*.i*.rpm
rpm -ivh sysstat-*.x*.rpm
rpm -ivh unixODBC-libs-*.i*.rpm
rpm -ivh unixODBC-libs-*.x*.rpm
rpm -ivh unixODBC-2*.i*.rpm
rpm -ivh unixODBC-2*.x*.rpm
rpm -ivh unixODBC-devel*.i*.rpm
rpm -ivh unixODBC-devel*.x*.rpm
--DNS相关软件包
rpm -ivh bind-9*.i*.rpm
rpm -ivh bind-9*.x*.rpm
rpm -ivh bind-utils*.i*.rpm
rpm -ivh bind-utils*.x*.rpm
rpm -ivh caching-nameserver*.i*.rp
rpm -ivh caching-nameserver*.x*.rp
rpm -ivh system-config-bind*.i*.rpm
rpm -ivh system-config-bind*.rpm
rpm -ivh bind-chroot*.i*.rpm
rpm -ivh bind-chroot*.x*.rpm
--ASM包安装 ---需下载
rpm -ivh oracleasm-support-2.1.7-1.el5.i386.rpm
rpm -ivh oracleasm-2.6.18-308.el5-2.0.5-1.el5.i686.rpm
rpm -ivh oracleasmlib-2.0.4-1.el5.i386.rpm
2、修改主机名
[root@localhost Server]# vi /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=grid01/grid02
3、配置host文件
[root@grid01 ~]# cat /etc/hosts
# Do not remove the following line, or variousprograms
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#public
172.168.9.15 grid01.prudentwoo.com grid01
172.168.9.16 grid02.prudentwoo.com grid02
#private
10.10.10.1 pri01.prudentwoo.com pri01
10.10.10.2 pri02.prudentwoo.com pri02
#virtual
172.168.9.21 vip01.prudentwoo.com vip01
172.168.9.22 vip02.prudentwoo.com vip02
#scan
172.168.9.17 scan.prudentwoo.com scan
172.168.9.18 scan.prudentwoo.com scan
172.168.9.19 scan.prudentwoo.com scan
172.168.9.20 scan.prudentwoo.com scan
4、配置DNS：
4.1、进入/var/named/chroot/etc目录中
[root@rac01 chroot]# cd /var/named/chroot/etc
查看当前目录下的文件，将named.caching-nameserver.conf拷贝一份为named.conf
[root@rac01 etc]# ls
localtime named.caching-nameserver.conf named.rfc1912.zones rndc.key
[root@rac01 etc]# cp –p named.caching-nameserver.confnamed.conf
[root@rac01 etc]# ls
localtime named.caching-nameserver.conf named.conf named.rfc1912.zones rndc.key
创建快捷方式到/etc/目录下
[root@localhost etc]# ln -s/var/named/chroot/etc/named.conf /etc/named.conf
4.2编辑named.conf文件，并进进行修改，阴影部分为修改部分：
[root@grid01 ~]# ll /etc/named.conf
lrwxrwxrwx 1 root root 32 Dec 2422:12 /etc/named.conf -> /var/named/chroot/etc/named.conf
[root@rac01etc]# vi /etc/name.conf
options{
listen-on port 53 { any; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file"/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
// Those options should be usedcarefully because they disable port
// randomization
// query-source port 53;
// query-source-v6 port 53;
allow-query { any; };
allow-query-cache { any; };
};
logging{
channel default_debug {
file"data/named.run";
severity dynamic;
};
};
viewlocalhost_resolver {
match-clients { any; };
match-destinations { any; };
recursion yes;
include "/etc/named.rfc1912.zones";
};
4.3 编辑/etc/named.rfc1912.zones添加如下内容
zone"prudentwoo.com" IN {
type master;
file "prudentwoo.com.zone";
allow-update { none; };
};
zone"9.168.172.in-addr.arpa" IN {
type master;
file "172.168.9.zone";
allow-update { none; };
allow-transfer {
172.168.9.17;
172.168.9.18;
172.168.9.19;
172.168.9.20;
};
};
4.4 编辑正向解析文件：
[root@grid01named]# cd /var/named/chroot/var/named
[root@rac01 named]# cp–p localdomain.zone prudentwoo.com.zone
[root@grid01named]# cp –p named.local 172.168.9.zone
[root@node1named]# vi prudentwoo.zone
$TTL 86400
@ IN SOA prudentwoo.com. root.prudentwoo.com. (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D) ; minimum
IN NS prudentwoo.com
scan IN A 172.168.9.17
scan IN A 172.168.9.18
scan IN A 172.168.9.19
scan IN A 172.168.9.20
4.5编辑反向解析文件：
[root@node1 named]# more 172.168.10.zone
$TTL 86400
@ IN SOA 9.168.172.in-addr.arpa. root.prudentwoo.com. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400) ; Minimum
@ IN NS prudentwoo.com.
17 IN PTR scan.prudentwoo.com.
18 IN PTR scan.prudentwoo.com.
19 IN PTR scan.prudentwoo.com.
20 IN PTR scan.prudentwoo.com.
4.6 添加DNS服务器地址，两个节点都要配置,节点二nameserver 反过来配置
[root@rac01 ~]# vi /etc/resolv.conf
#search localdomain
search prudentwoo.com
nameserver 172.168.9.15
nameserver 172.168.9.16
4.7 创建连接文件
[root@grid01 named]# ln -s/var/named/chroot/var/named/172.168.9.zone /var/named/172.168.9.zone
[root@grid01 named]# ln -s/var/named/chroot/var/named/prudentwoo.comn.zone /var/named/prudentwoo.comn.zone
[root@grid01 named]# ll /var/named/
total 16
lrwxrwxrwx 1 root root 42 Dec 24 21:19172.168.9.zone -> /var/named/chroot/var/named/172.168.9.zone
drwxr-x--- 6 root named 4096 Dec 24 19:38 chroot
drwxrwx--- 2 named named 4096 Dec 2 2011data
lrwxrwxrwx 1 root named 44 Dec 24 19:19localdomain.zone -> /var/named/chroot/var/named/localdomain.zone
lrwxrwxrwx 1 root named 42 Dec 24 19:19localhost.zone -> /var/named/chroot/var/named/localhost.zone
lrwxrwxrwx 1 root named 43 Dec 24 19:19named.broadcast -> /var/named/chroot/var/named/named.broadcast
lrwxrwxrwx 1 root named 36 Dec 24 19:19 named.ca-> /var/named/chroot/var/named/named.ca
-rw-r----- 1 root root 1206 Dec 24 20:55 named.conf
lrwxrwxrwx 1 root named 43 Dec 24 19:19named.ip6.local -> /var/named/chroot/var/named/named.ip6.local
lrwxrwxrwx 1 root named 39 Dec 24 19:19named.local -> /var/named/chroot/var/named/named.local
lrwxrwxrwx 1 root named 38 Dec 24 19:19 named.zero-> /var/named/chroot/var/named/named.zero
lrwxrwxrwx1 root root 47 Dec 24 21:20 prudentwoo.com.zone ->/var/named/chroot/var/named/prudentwoo.com.zone
drwxrwx---2 named named 4096 Dec 2 2011 slaves
-----4.8重启DNS服务
1、DNS出现如下信息无法起来，检查message日志：
[root@rac01 log]# service named restart
Stopping named: [ OK ]
Starting named: [FAILED]
[root@rac01 log]# cd /var/log
[root@rac01 log]# pwd
/var/log
[root@rac01 log]# tail -f messages
Nov 100:46:01 localhost named[29489]: loading configuration: permission denied
Nov 100:46:01 localhost named[29489]: exiting (due to fatal error)
Nov 100:48:58 localhost named[29564]: starting BIND 9.3.6-P1-RedHat-9.3.6-20.P1.el5-u named -t /var/named/chroot
Nov 100:48:58 localhost named[29564]: adjusted limit on open files from 1024 to1048576
Nov 1 00:48:58localhost named[29564]: found 1 CPU, using 1 worker thread
Nov 100:48:58 localhost named[29564]: using up to 4096 sockets
Nov 100:48:58 localhost named[29564]: loading configuration from '/etc/named.conf'
Nov 100:48:58 localhost named[29564]: none:0: open: /etc/named.conf: permissiondenied
Nov 100:48:58 localhost named[29564]: loading configuration: permission denied
Nov 100:48:58 localhost named[29564]: exiting (due to fatal error)
修改named.conf权限，然后再重启:
[root@rac01 log]# ls -al/var/named/chroot/etc/named.conf
-rw-r----- 1 root root 1206 Nov 1 00:07 /var/named/chroot/etc/named.conf
[root@rac01 log]# chown root:named/var/named/chroot/etc/named.c
named.caching-nameserver.conf named.conf
[root@rac01 log]# chown root:named/var/named/chroot/etc/named.conf
4.8重启：
[root@rac01 log]# service named restart
Stopping named: [ OK ]
Starting named: [ OK ]
[root@rac01 log]#
4.9 验证DNS，至此发现DNS出现轮询就OK了。
[root@rac01 named]# nslookupnode-scan.prudentwoo.com
Server: 172.168.9.15
Address: 172.168.9.15#53
Name: node-scan.prudentwoo.com
Address: 172.168.9.21
Name: node-scan.prudentwoo.com
Address: 172.168.9.22
Name: node-scan.prudentwoo.com
Address: 172.168.9.23
Name: node-scan.prudentwoo.com
Address: 172.168.9.24
Name: node-scan.prudentwoo.com
Address: 172.168.9.20
4.10 反向解析验证DNS:
[root@grid01 named]# nslookup 172.168.9.15
Server: 172.168.9.15
Address: 172.168.9.15#53
** server can't find 15.9.168.172.in-addr.arpa.:NXDOMAIN
You have new mail in /var/spool/mail/root
[root@grid01 named]# nslookup 172.168.9.16
Server: 172.168.9.15
Address: 172.168.9.15#53
** server can't find 16.9.168.172.in-addr.arpa.:NXDOMAIN
[root@grid01 named]# nslookup 172.168.9.17
Server: 172.168.9.15
Address: 172.168.9.15#53
17.9.168.172.in-addr.arpa name = scan.prudentwoo.com.
[root@grid01 named]# nslookup 172.168.9.18
Server: 172.168.9.15
Address: 172.168.9.15#53
18.9.168.172.in-addr.arpa name = scan.prudentwoo.com.
[root@grid01 named]# nslookup 172.168.9.19
Server: 172.168.9.15
Address: 172.168.9.15#53
19.9.168.172.in-addr.arpa name = scan.prudentwoo.com.
[root@grid01 named]# nslookup 172.168.9.20
5、添加NTP和DNS服务自启动
Ntsysv
或 chkconfig namedon chkchonfig ntpd on
检查自启动服务状态
chkconfig --list
6、创建用户组;
/usr/sbin/groupadd -g 502 dba
/usr/sbin/groupadd -g 501 oinstall
/usr/sbin/groupadd -g 504 asmadmin
/usr/sbin/groupadd -g 506 asmdba
/usr/sbin/groupadd -g 507 asmoper
/usr/sbin/useradd -u 501 -g oinstall -Gasmadmin,asmdba,asmoper grid
/usr/sbin/useradd -u 502 -g oinstall -G dba,asmdbaoracle
[root@rac01 named]# passwd grid
[root@rac01 named]# passwd oracle
[root@rac01 named]#
7、创建目录：
Oracle清单目录
mkdir -p /app/oraInventory
chown -R grid:oinstall /app/oraInventory
chmod -R 775 /app/oraInventory
Grid安装目录
mkdir -p /app/grid
mkdir -p /app/11.2.0/grid
chown -R grid:oinstall /app/11.2.0/grid
chmod -R 775 /app/11.2.0/grid
创建Oracle安装目录
mkdir -p /app/oracle/product/11.2.0/db_1
mkdir -p/app/oracle/cfgtoollogs
chown -R oracle:oinstall /app/oracle
chmod -R 775 /app/oracle
8、修改系统参数，在末端添加如下内容
8.1 修改内存参数：
vi /etc/sysctl.conf
kernel.shmall = 2097152
kernel.sem = 250 32000 100 128
kernel.shmmni = 4096
#kernel.shmax = 8589934592
fs.file-max = 6815744
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 1048576
net.core.wmem_max = 1048576
fs.aio-max-nr = 1048576
8.2 修改限制参数：
编辑/etc/security/limits.conf
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536
* soft memlock 3145728
* hard memlock 3145728
8.3 修改Oracle用户环境变量，添加如下信息
[root@rac01 ~]# su - oracle
[oracle@rac01 ~]$ vi .bash_profile
#.bash_profile
# Getthe aliases and functions
if [ -f~/.bashrc ]; then
. ~/.bashrc
fi
# Userspecific environment and startup programs
PATH=$PATH:$HOME/bin
exportPATH
#OracleSettings
TMP=/tmp;export TMP
exportTMPDIR=$TMP;
exportORACLE_HOSTNAME=grid01;
exportORACLE_UNQNAME=woo;
exportORACLE_BASE=/app/oracle;
exportORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1;
exportORACLE_SID=woo1;
exportORACLE_TERM=xterm;
exportPATH=/usr/sbin:$PATH;
exportPATH=$ORACLE_HOME/bin:$PATH;
exportLD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
exportCLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
umask022
8.4 修改grid用户环境变量，添加如下信息：
[root@rac01 ~]# su - grid
[grid@rac01 ~]$ vi .bash_profile
#.bash_profile
# Getthe aliases and functions
if [ -f~/.bashrc ]; then
. ~/.bashrc
fi
# Userspecific environment and startup programs
PATH=$PATH:$HOME/bin
exportPATH
exportTMP=/tmp;
exportTMPDIR=$TMP;
exportGRID_SID=+ASM1;
export ORACLE_BASE=/app/grid;
export ORACLE_HOME=/app/11.2.0/grid;
exportPATH=$GRID_HOME/bin:$PATH;
umask022
8.5 编辑/etc/pam.d/login，添加如下内容：
Session required pam_limits.so
编辑/etc/profile，添加如下内容：
[root@rac01 ~]# vi /etc/profile
if [ $USER = "oracle" ]||[ $USER = "grid" ] ;then
if [ $SHELL ="/bin/ksh" ]; then
ulimit -p16384
ulimit -n65536
else
ulimit -u16384 -n 65536
fi
umask 022
fi
9、停ntp时间同步(11G新增检查选项)
/etc/init.d/ntpd stop
chkconfig ntpd off
mv /etc/ntp.conf /etc/ntp.conf.org
rm /etc/ntp.conf
如果要使用NTP，需要对NTP配置文件参数进行修改：
编辑/etc/sysconfig/ntpd,修改如下：
OPTIONS=”-x–u ntp:ntp–p /var/run/ntpd.pid”
然后重启ntp服务：
修改DNS主机搜索顺序，将DNS放在优先位置：
[root@rac01 named]# vi /etc/nsswitch.conf
hosts: dns files nis
修改后重启服务：
[root@rac01 named]# service nscd restart
Stopping nscd: [FAILED]
Starting nscd: [ OK ]
创建磁盘分区
OCR 8G
DATA 20G
FRA 20G
[root@rac01 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
DeviceBoot Start End Blocks Id System
/dev/sda1 * 1 38 305203+ 83 Linux
/dev/sda2 39 1201 9341797+ 83 Linux
/dev/sda3 1202 2245 8385930 83 Linux
/dev/sda4 2246 2610 2931862+ 5 Extended
/dev/sda5 2246 2506 2096451 82 Linux swap / Solaris
Disk /dev/sdb: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partitiontable
Disk /dev/sdc: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdc doesn't contain a valid partitiontable
Disk /dev/sdd: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdd doesn't contain a valid partitiontable
[root@rac01~]# fdisk /dev/sdb
Device contains neither a valid DOS partitiontable, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remainin memory only,
until you decide to write them. After that, ofcourse, the previous
content won't be recoverable.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1044, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-1044,default 1044):
Using default value 1044
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac01~]# fdisk /dev/sdc
Device contains neither a valid DOS partitiontable, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remainin memory only,
until you decide to write them. After that, ofcourse, the previous
content won't be recoverable.
The number of cylinders for this disk is set to2610.
There is nothing wrong with that, but this islarger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., oldversions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOSFDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4will be corrected by w(rite)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2610, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-2610,default 2610):
Using default value 2610
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac01 ~]# fdisk /dev/sdd
Device contains neither a valid DOS partitiontable, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remainin memory only,
until you decide to write them. After that, ofcourse, the previous
content won't be recoverable.
The number of cylinders for this disk is set to2610.
There is nothing wrong with that, but this islarger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., oldversions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOSFDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4will be corrected by w(rite)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2610, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-2610,default 2610):
Using default value 2610
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac01 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
DeviceBoot Start End Blocks Id System
/dev/sda1 * 1 38 305203+ 83 Linux
/dev/sda2 39 1201 9341797+ 83 Linux
/dev/sda3 1202 2245 8385930 83 Linux
/dev/sda4 2246 2610 2931862+ 5 Extended
/dev/sda5 2246 2506 2096451 82 Linux swap / Solaris
Disk /dev/sdb: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
DeviceBoot Start End Blocks Id System
/dev/sdb1 1 1044 8385898+ 83 Linux
Disk /dev/sdc: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
DeviceBoot Start End Blocks Id System
/dev/sdc1 1 2610 20964793+ 83 Linux
Disk /dev/sdd: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
DeviceBoot Start End Blocks Id System
/dev/sdd1 1 2610 20964793+ 83 Linux
[root@rac01 ~]#
安装ASM
[root@grid02 asm]# ls
oracleasm-2.6.18-308.el5-2.0.5-1.el5.i686.rpm oracleasmlib-2.0.4-1.el5.i386.rpm oracleasm-support-2.1.7-1.el5.i386.rpm
[root@grid02 asm]# rpm -ivhoracleasm-support-2.1.7-1.el5.i386.rpm
warning: oracleasm-support-2.1.7-1.el5.i386.rpm:Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [100%]
[root@grid02 asm]# rpm -ivh oracleasm-2.6.18-308.el5-2.0.5-1.el5.i686.rpm
warning:oracleasm-2.6.18-308.el5-2.0.5-1.el5.i686.rpm: Header V3 DSA signature: NOKEY,key ID 1e5e0159
Preparing... ########################################### [100%]
1:oracleasm-2.6.18-308.el###########################################[100%]
[root@grid02 asm]# rpm -ivhoracleasmlib-2.0.4-1.el5.i386.rpm
warning: oracleasmlib-2.0.4-1.el5.i386.rpm: HeaderV3 DSA signature: NOKEY, key ID 1e5e0159
Preparing... ###########################################[100%]
1:oracleasmlib ########################################### [100%]
配置ASMLib
[root@grid01 grid]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of theOracle ASM library
driver. Thefollowing questions will determine whether the driver is
loaded on boot and what permissions it willhave. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmadmin
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration:done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
建立ASM磁盘
/usr/sbin/oracleasm createdisk OCR_VOTE1 /dev/sdb1
/usr/sbin/oracleasm createdisk OCR_VOTE2 /dev/sdc1
/usr/sbin/oracleasm createdisk OCR_VOTE3 /dev/sdd1
/usr/sbin/oracleasm createdisk DATA001 /dev/sde1
/usr/sbin/oracleasm createdisk ARC001 /dev/sdf1
/usr/sbin/oracleasm createdisk FRA001 /dev/sdg1
另一节点执行发现磁盘
[root@grid02 ~]# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [ OK ]
[root@grid02 ~]# /etc/init.d/oracleasm listdisks
ARC001
DATA001
FRA001
OCR_VOTE1
OCR_VOTE2
OCR_VOTE3
验证安装前的检查：
./runcluvfy.sh stage -pre crsinst -n rac01,rac02-fixup–verbose
./runcluvfy.shcomp nodecon -n rac01,rac02 –verbose
安装完成后执行root脚本
[root@grid01 /]#/app/oraInventory/orainstRoot.sh
Changing permissions of /app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /app/oraInventory tooinstall.
The execution of the script is complete.
[root@grid01 /]# /app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /app/11.2.0/grid
Enter the full pathname of the local bin directory:[/usr/local/bin]:
Copyingdbhome to /usr/local/bin ...
Copyingoraenv to /usr/local/bin ...
Copyingcoraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file asneeded by
Database Configuration Assistant when a database iscreated
Finished running generic part of root.sh script.
Now product-specific root actions will beperformed.
2012-12-26 23:38:51: Parsing the host name
2012-12-26 23:38:51: Checking for super userprivileges
2012-12-26 23:38:51: User has super user privileges
Using configuration parameter file:/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root walletcert
root certexport
peer wallet
profilereader wallet
pa wallet
peer walletkeys
pa walletkeys
peer certrequest
pa certrequest
peer cert
pa cert
peer rootcert TP
profilereader root cert TP
pa rootcert TP
peer pacert TP
pa peercert TP
profilereader pa cert TP
profile readerpeer cert TP
peer usercert
pa usercert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services hasbeen started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on'grid01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'grid01'
CRS-2676: Start of 'ora.mdnsd' on 'grid01'succeeded
CRS-2676: Start of 'ora.gipcd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on'grid01'
CRS-2676: Start of 'ora.gpnpd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on'grid01'
CRS-2676: Start of 'ora.cssdmonitor' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.cssd' on'grid01'
CRS-2672: Attempting to start 'ora.diskmon' on'grid01'
CRS-2676: Start of 'ora.diskmon' on 'grid01'succeeded
CRS-2676: Start of 'ora.cssd' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on'grid01'
CRS-2676: Start of 'ora.ctssd' on 'grid01'succeeded
ASM created and started successfully.
DiskGroup OCR_VOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on'grid01'
CRS-2676: Start of 'ora.crsd' on 'grid01' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk2b34943383f64f00bf2e91653dd35ff4.
Successful addition of voting disk2c1bbab1e3054f81bf528e9630333192.
Successful addition of voting disk88252b92194c4f62bfe070bb314bd171.
Successfully replaced voting disk group with+OCR_VOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1.ONLINE 2b34943383f64f00bf2e91653dd35ff4(ORCL:OCR_VOTE3) [OCR_VOTE]
2.ONLINE 2c1bbab1e3054f81bf528e9630333192(ORCL:OCR_VOTE2) [OCR_VOTE]
3.ONLINE 88252b92194c4f62bfe070bb314bd171(ORCL:OCR_VOTE1) [OCR_VOTE]
Located 3 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'grid01'
CRS-2677: Stop of 'ora.crsd' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'grid01'
CRS-2677: Stop of 'ora.asm' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on'grid01'
CRS-2677: Stop of 'ora.ctssd' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on'grid01'
CRS-2677: Stop of 'ora.cssdmonitor' on 'grid01'succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'grid01'
CRS-2677: Stop of 'ora.cssd' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on'grid01'
CRS-2677: Stop of 'ora.gpnpd' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on'grid01'
CRS-2677: Stop of 'ora.gipcd' on 'grid01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on'grid01'
CRS-2677: Stop of 'ora.mdnsd' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on'grid01'
CRS-2676: Start of 'ora.mdnsd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.gipcd' on'grid01'
CRS-2676: Start of 'ora.gipcd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on'grid01'
CRS-2676: Start of 'ora.gpnpd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on'grid01'
CRS-2676: Start of 'ora.cssdmonitor' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.cssd' on'grid01'
CRS-2672: Attempting to start 'ora.diskmon' on'grid01'
CRS-2676: Start of 'ora.diskmon' on 'grid01'succeeded
CRS-2676: Start of 'ora.cssd' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on'grid01'
CRS-2676: Start of 'ora.ctssd' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.asm' on 'grid01'
CRS-2676: Start of 'ora.asm' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.crsd' on'grid01'
CRS-2676: Start of 'ora.crsd' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.evmd' on'grid01'
CRS-2676: Start of 'ora.evmd' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'grid01'
CRS-2676: Start of 'ora.asm' on 'grid01' succeeded
CRS-2672: Attempting to start 'ora.OCR_VOTE.dg' on'grid01'
CRS-2676: Start of 'ora.OCR_VOTE.dg' on 'grid01'succeeded
CRS-2672: Attempting to start 'ora.registry.acfs'on 'grid01'
CRS-2676: Start of 'ora.registry.acfs' on 'grid01'succeeded
grid01 2012/12/26 23:49:34 /app/11.2.0/grid/cdata/grid01/backup_20121226_234934.olr
Preparing packages for installation...
cvuqdisk-1.0.7-1
Configure Oracle Grid Infrastructure for a Cluster... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500MB. Actual 2047 MB Passed
The inventory pointer is located at/etc/oraInst.loc
The inventory is located at /app/oraInventory
'UpdateNodeList' wassuccessful.
节点二执行如下：
[root@grid02 ~]#/app/oraInventory/orainstRoot.sh
Changing permissions of /app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /app/oraInventory tooinstall.
The execution of the script is complete.
[root@grid02 ~]#/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /app/11.2.0/grid
Enter the full pathname of the local bin directory:[/usr/local/bin]:
Copyingdbhome to /usr/local/bin ...
Copyingoraenv to /usr/local/bin ...
Copyingcoraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file asneeded by
Database Configuration Assistant when a database iscreated
Finished running generic part of root.sh script.
Now product-specific root actions will beperformed.
2012-12-26 23:52:45: Parsing the host name
2012-12-26 23:52:45: Checking for super userprivileges
2012-12-26 23:52:45: User has super user privileges
Using configuration parameter file:/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services hasbeen started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusivemode but found an active CSS daemon on node grid01, number 1, and isterminating
An active cluster was found during exclusivestartup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on'grid02'
CRS-2676: Start of 'ora.mdnsd' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.gipcd' on'grid02'
CRS-2676: Start of 'ora.gipcd' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on'grid02'
CRS-2676: Start of 'ora.gpnpd' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on'grid02'
CRS-2676: Start of 'ora.cssdmonitor' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.cssd' on'grid02'
CRS-2672: Attempting to start 'ora.diskmon' on'grid02'
CRS-2676: Start of 'ora.diskmon' on 'grid02'succeeded
CRS-2676: Start of 'ora.cssd' on 'grid02' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on'grid02'
CRS-2676: Start of 'ora.ctssd' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on'grid02'
CRS-2676: Start of 'ora.drivers.acfs' on 'grid02'succeeded
CRS-2672: Attempting to start 'ora.asm' on 'grid02'
CRS-2676: Start of 'ora.asm' on 'grid02' succeeded
CRS-2672: Attempting to start 'ora.crsd' on'grid02'
CRS-2676: Start of 'ora.crsd' on 'grid02' succeeded
CRS-2672: Attempting to start 'ora.evmd' on'grid02'
CRS-2676: Start of 'ora.evmd' on 'grid02' succeeded
grid02 2012/12/26 23:58:32 /app/11.2.0/grid/cdata/grid02/backup_20121226_235832.olr
Preparing packages for installation...
cvuqdisk-1.0.7-1
Configure Oracle Grid Infrastructure for a Cluster... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500MB. Actual 2047 MB Passed
The inventory pointer is located at/etc/oraInst.loc
The inventory is located at /app/oraInventory
'UpdateNodeList' was successful.
[root@grid02 ~]#
检查状态，如果有问题，按照如下操作：
[grid@grid01 ~]$ crsctl check cluster -all
在第二个节点执行删除操作，重新运行root脚本
/app/11.2.0/grid/crs/install/rootcrs.pl -verbose-deconfig –force
/app/11.2.0/grid/root.sh
检查状态：
[grid@grid01 ~]$ crsctl check cluster -all
**************************************************************
grid01:
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services isonline
CRS-4533: Event Manager is online
**************************************************************
grid02:
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services isonline
CRS-4533: Event Manager isonline
[grid@grid02 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....N1.lsnr ora....er.type ONLINE ONLINE grid02
ora....N2.lsnr ora....er.type ONLINE ONLINE grid01
ora....N3.lsnr ora....er.type ONLINE ONLINE grid01
ora....N4.lsnr ora....er.type ONLINE ONLINE grid01
ora....VOTE.dg ora....up.type ONLINE ONLINE grid01
ora.asm ora.asm.type ONLINE ONLINE grid01
ora.eons ora.eons.type ONLINE ONLINE grid01
ora....SM1.asm application ONLINE ONLINE grid01
ora.grid01.gsd application OFFLINE OFFLINE
ora.grid01.ons application ONLINE ONLINE grid01
ora.grid01.vip ora....t1.type ONLINE ONLINE grid01
ora....SM2.asm application ONLINE ONLINE grid02
ora.grid02.gsd application OFFLINE OFFLINE
ora.grid02.ons application ONLINE ONLINE grid02
ora.grid02.vip ora....t1.type ONLINE ONLINE grid02
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE grid01
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE grid01
ora....ry.acfs ora....fs.type ONLINE ONLINE grid01
ora.scan1.vip ora....ip.type ONLINE ONLINE grid02
ora.scan2.vip ora....ip.type ONLINE ONLINE grid01
ora.scan3.vip ora....ip.type ONLINE ONLINE grid01
ora.scan4.vip ora....ip.type ONLINE ONLINE grid01
[grid@grid02 ~]$
错误检查：
检查votdisk 状态
crsctlquery css votedisk
检查ocr状态
Ocrcheck
检查集群节点：
olsnodes –n
olsnodes -n -p -l -s -t -v
检查监听状态：
srvctl status listener
检查asm
srvctl status asm –a
创建数据盘
Asmca
启动GSD和OC4J服务
查看状态
Srvctl status oc4j
Srvctl status nodeapps
开启自动启动
srvctl enable oc4j
srvctl enable nodeapps
手工带起服务
srvctl start nodeapps -n grid01
srvctl start nodeapps –n grid02
可以看到服务已经全部起来：
[grid@grid01 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....ER.lsnr ora....er.type ONLINE ONLINE grid01
ora....N1.lsnr ora....er.type ONLINE ONLINE grid02
ora....N2.lsnr ora....er.type ONLINE ONLINE grid01
ora....N3.lsnr ora....er.type ONLINE ONLINE grid01
ora....N4.lsnr ora....er.type ONLINE ONLINE grid01
ora....VOTE.dg ora....up.type ONLINE ONLINE grid01
ora.asm ora.asm.type ONLINE ONLINE grid01
ora.eons ora.eons.type ONLINE ONLINE grid01
ora....SM1.asm application ONLINE ONLINE grid01
ora....01.lsnr application ONLINE ONLINE grid01
ora.grid01.gsd application ONLINE ONLINE grid01
ora.grid01.ons application ONLINE ONLINE grid01
ora.grid01.vip ora....t1.type ONLINE ONLINE grid01
ora....SM2.asm application ONLINE ONLINE grid02
ora....02.lsnr application ONLINE ONLINE grid02
ora.grid02.gsd application ONLINE ONLINE grid02
ora.grid02.ons application ONLINE ONLINE grid02
ora.grid02.vip ora....t1.type ONLINE ONLINE grid02
ora.gsd ora.gsd.type ONLINE ONLINE grid01
ora....network ora....rk.type ONLINE ONLINE grid01
ora.oc4j ora.oc4j.type ONLINE ONLINE grid02
ora.ons ora.ons.type ONLINE ONLINE grid01
ora....ry.acfs ora....fs.type ONLINE ONLINE grid01
ora.scan1.vip ora....ip.type ONLINE ONLINE grid02
ora.scan2.vip ora....ip.type ONLINE ONLINE grid01
ora.scan3.vip ora....ip.type ONLINE ONLINE grid01
ora.scan4.vip ora....ip.type ONLINE ONLINE grid01
[grid@grid01 ~]$
开始安装数据库软件：
安装完成之后，在两个节点分别执行root脚本
[root@grid01 ~]#/app/oracle/product/11.2.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /app/oracle/product/11.2.0/db_1
Enter the full pathname of the local bin directory:[/usr/local/bin]:
The file "dbhome" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copyingdbhome to /usr/local/bin ...
The file "oraenv" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copyingoraenv to /usr/local/bin ...
The file "coraenv" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copyingcoraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file asneeded by
Database Configuration Assistant when a database iscreated
Finished running generic part of root.sh script.
Now product-specific root actions will beperformed.
Finished product-specific root actions.
节点二、
[root@grid02 db_1]#/app/oracle/product/11.2.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /app/oracle/product/11.2.0/db_1
Enter the full pathname of the local bin directory:[/usr/local/bin]:
The file "dbhome" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copyingdbhome to /usr/local/bin ...
The file "oraenv" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenvto /usr/local/bin ...
The file "coraenv" already exists in/usr/local/bin. Overwrite it? (y/n)
[n]: y
Copyingcoraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file asneeded by
Database Configuration Assistant when a database iscreated
Finished running generic part of root.sh script.
Now product-specific root actions will beperformed.
Finished product-specific root actions.
[root@grid02 db_1]#
开始创建数据库：
[grid@grid01 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.ARC001.dg ora....up.type ONLINE ONLINE grid01
ora.DATA001.dg ora....up.type ONLINE ONLINE grid01
ora.FRA001.dg ora....up.type ONLINE ONLINE grid01
ora....ER.lsnr ora....er.type ONLINE ONLINE grid01
ora....N1.lsnr ora....er.type ONLINE ONLINE grid01
ora....N2.lsnr ora....er.type ONLINE ONLINE grid02
ora....N3.lsnr ora....er.type ONLINE ONLINE grid02
ora....N4.lsnr ora....er.type ONLINE ONLINE grid02
ora....VOTE.dg ora....up.type ONLINE ONLINE grid01
ora.asm ora.asm.type ONLINE ONLINE grid01
ora.eons ora.eons.type ONLINE ONLINE grid01
ora....SM1.asm application ONLINE ONLINE grid01
ora....01.lsnr application ONLINE ONLINE grid01
ora.grid01.gsd application ONLINE ONLINE grid01
ora.grid01.ons application ONLINE ONLINE grid01
ora.grid01.vip ora....t1.type ONLINE ONLINE grid01
ora....SM2.asm application ONLINE ONLINE grid02
ora....02.lsnr application ONLINE ONLINE grid02
ora.grid02.gsd application ONLINE ONLINE grid02
ora.grid02.ons application ONLINE ONLINE grid02
ora.grid02.vip ora....t1.type ONLINE ONLINE grid02
ora.gsd ora.gsd.type ONLINE ONLINE grid01
ora....network ora....rk.type ONLINE ONLINE grid01
ora.oc4j ora.oc4j.type ONLINE ONLINE grid02
ora.ons ora.ons.type ONLINE ONLINE grid01
ora....ry.acfs ora....fs.type ONLINE ONLINE grid01
ora.scan1.vip ora....ip.type ONLINE ONLINE grid01
ora.scan2.vip ora....ip.type ONLINE ONLINE grid02
ora.scan3.vip ora....ip.type ONLINE ONLINE grid02
ora.scan4.vip ora....ip.type ONLINE ONLINE grid02
ora.woo.db ora....se.type ONLINE ONLINE grid01
[grid@grid01 ~]$ exit
数据库安装常见错误处理
1.在第二个节点运行root.sh报错，信息如下：
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /app/11.2.0/grid/bin/crsctlstart resource ora.asm -init
Start of resource "ora.asm -init" failed
Failed to start ASM
Failed to start Oracle Clusterware stack
报上面的错误，上网查了下，自己疏忽造成的，由于我的第二个节点是从第一个节点拷贝的，/etc/hosts文件配置不对，本地的主机名配置不正确。
解决办法：
修改/etc/hosts文件配置
#that require network functionality will fail.
127.0.0.1 node2localhost.localdomain localhost
执行：
[root@node2 install]# /app/11.2.0/grid/crs/install/roothas.pl -delete-force –verbose
重新运行脚本：
[root@node2 install]# /app/11.2.0/grid/root.sh
运行成功。
2.在第二个节点运行root.sh报错，报错信息如下：
INFO: ERROR:
INFO: PRVF-4664 : Found inconsistent name resolution entries for SCAN name"node-scan"
INFO: ERROR:
INFO: PRVF-4657 : Name resolution setup check for "node-scan"(IP address: 192.168.10.25) failed
INFO: ERROR:
INFO: PRVF-4664 : Found inconsistent name resolution entries for SCAN name"node-scan"
INFO: Verification of SCAN VIP and Listener setup failed
上oracle网站查了下，这种情况的原因有几种，我的原因是由于使用了/etc/hosts文件来解析scan-ip引起的，如果能ping通scan-ip就可以直接忽略掉。
参考metalink文件：ID 887471.1
3.安装oracle软件时报错，报错信息如下：
INS-35354
上metalink查了下，是由于oracle目录清单配置文件里的集群配置不对，修改即可：
$cat /home/grid/oraInventory/ContentsXML/inventory.xml
<HOME NAME="Ora11g_gridinfrahome1"LOC="/ocw/grid" TYPE="O" IDX="4"CRS="true">
<NODE_LIST>
<NODE NAME="racnode1"/>
<NODE NAME="racnode2"/>
<NODE NAME="racnode3"/>
</NODE_LIST>
</HOME>
将CRS=true添加到两个节点的配置文件里即可。
参考文件：ID 1053393.1
